|
||||||||||||||||
|
Royalty Payments Frequently Asked QuestionsHow do I find out about my personal royalty payments? The Office of Mineral Resources only has responsibility for the collection of royalty payments on state owned lands and water bottoms. Unfortunately, the office is unable to answer questions regarding royalty payments due to an individual from a lease on privately held lands. We recommend that individuals with such concerns retain private counsel to handle matters on such leases. Is royalty due on gas used in field or lease operations? In a majority of the cases, yes. Most State of Louisiana leases require the payment of royalty on gas utilized for lease or field operations. See section 5 and Appendix C of the State Royalty Report Instructions Is royalty due on vented or flared gas? Gas that is vented or flared during normal operations is not subject to State royalty. However, gas that is vented or flared after utilization for gas lift is royalty bearing. Is royalty due on flash gas? Gas “flashed” from oil is royalty bearing when the recovery occurs prior to the point of sale. Is royalty due on gas loss in the line? Under normal circumstances, no. However, the lessee is responsible for maintaining equipment and lines within the field and any excessive loss is subject to question as to whether the loss was unavoidable or a result of poor field management. What deductions or costs may be taken in computing state royalty? The State Mineral Board has over the years recognized the applicability of certain deductions under most of its lease forms. Generally, they include reasonable transportation costs for oil and gas when the product is delivered from the field to a point of delivery outside the field in which the production occurred and reasonable gas compression charges where gas must be compressed for insertion into a sales line. In addition, the lawful amount of severance tax allocable to royalties and paid to the Department of Revenue may be deducted from royalty payments. See Section 5 of the publication for further explanation. See Appendix C for royalty clauses in existing state leases. Are the oilfield site restoration fees levied under R.S. 30:87 deductible in computing State royalty? No. LA R.S. 30:87(E) provides that “The fees provided for in Subsections A and B of this Section shall be borne by the responsible parties and not by the royalty and overriding royalty owner.” Other types of fees that may be levied by the State are also not deductible in computing State royalty. Can I deduct and how do I deduct severance taxes charged on fuel and shrinkage in a gas processing plant? Even though fuel and shrinkage are not royalty bearing, severance taxes charged on these items may be deducted in computing gas royalty. Add the severance taxes paid for fuel and shrinkage to the severance tax for the sales gas. What is the statue of limitations on State royalty? There is no statue of limitation on State royalty. Civil Code Article 3494 provides - The following actions are subject to a liberative prescription of three years:
Will I be excused from interest and penalties on late State royalty payments because the State has not executed a division order? Execution of a Division Order has never been required by the State Mineral Board or any existing State Lease form as a prerequisite to the payment of royalty. Title 31, Section 138.1 of the Louisiana Revised Statutes provides that:
The State Mineral Board will, however, execute Division Orders prepared by payor companies on the State approved form. Is State royalty to be computed and paid on entitled or taken volumes? The State expects to be paid royalty on entitled volumes and when a payor company is audited the audit will be conducted on an entitled basis. What is a volume factor and how is it used in computing State royalty? Where a payor company reports and pays royalty on less than 100% of the total LUW production, the volume factor designates the percentage of the total (100%) property (LUW Code) volume to which the payor is entitled and on which the payor will report royalties paid to the state. Since the calculation of property decimal assumes that the payor will report 100% of the LUW volume, the volume factor is used to adjust the payor decimal to account for the difference between the LUW volume and the volume the payor will report. The payor company must inform the Office of Mineral Resources via the payor register the percentage of volume which will be reported on the State royalty report. You are here:How-to Guide > Royalties > Royalty Payments Frequently Asked Questions |
|||||||||||||||
|
|
||||||||||||||||
| Updated Tuesday, May 20, 2008 3:24:32 PM | ||||||||||||||||